Planning a microwave 5G project is time consuming and requires skills from several different disciplines. Investing in microwave equipment that reliably delivers high-capacity internet with minimal maintenance and operational costs is crucial to maximizing the anticipated return on investment (ROI). This requires project planners to have a high technical ability and a strong business acumen including a clear understanding of the cost drivers applicable to their network.
A common mistake when anticipating ROI for 5G equipment is only considering the purchase and installation costs. Future expenses also need to be considered to understand what the total cost of ownership (TCO) is.
Without knowing the TCO, the estimated ROI cannot be calculated correctly. An incorrect ROI will result in a misleading higher anticipated profitability, not accounting for major future expenses.
Anticipated ROI = (Lifetime Expected Revenues/ Lifetime Expected Expenses)*100
TCO = Initial CAPEX + Initial OPEX + Future CAPEX + Future OPEX
The table below illustrates expenses that are considered when planning a microwave project.
|Hardware – radio, antenna and other accessories
|Site/path surveys and Link design
|Annual Spectrum license fees
|Tower engineering and strengthening (if needed)
|Spectrum license application and initial fee
|Mobilization and Installation costs
|Tower lease fees (radio, and antenna) if applicable
|Shipping and storage costs
|Antenna upgrade costs (if needed)
|Maintenance, cost of reliability (truck rolls, repair/replacement)
|Mobilization and Installation costs
|Capacity upgrade and other feature licenses
Capacity upgrades like the example above are easily accounted for in TCO but budget equipment can incur unexpected OPEX/ OPEX too. To keep their prices low, budget vendors will cut corners. A common source of expenses with budget equipment is their half-baked management software and poorly designed hardware with a lower MTBF. When the software or hardware fails so does the network, resulting in service interruption and expensive truck rolls.
How can you lower your Network TCO?
Aviat Networks works every day to develop solutions that drive down every aspect of OPEX/ TCO. The following table lists some of the key drivers in costs that Aviat has found as a result of discussions with our customers around the world, and what we have done to address this.
|Complex, time consuming Link Design
|Free online Design tool for microwave, E-Band and Multi-Band links, including 3rd Party products. Designed to be used by Engineers
|High tower lease fees
|Highest Tx Power radios, 4+0 with A2C+
|Aviat’s products all support market leading system gain performance, while A2C+ provides up to 10dB system gain improvement for 4+0 configurations, to reduce the size of antennas needed that significantly lowers tower lease costs
|High annual Spectrum charges
|Moving capacity from expensive microwave bands to cheaper E-Band, while maintaining microwave for critical availability traffic
|Replacing microwave with fiber to increase capacity
|Overlay new E-Band link on top of legacy microwave to support multi-gigabit capacity needed for 5G, removing the need to deploy fiber
|Deploying fiber for longer distance links
|High capacity up to 10 Gbps over extended distances up to 20 Km
|WTM 4000 Integrated MPLS
|Integrated networking built into all-outdoor microwave, removes the need for additional router and cabinet at edge sites
|Reducing downtime and improving network availability
|CTR 8740 HA
|Resilient, high availability routing as an alternative to much more costly redundant solutions.
|Complex and expensive Trunking solutions
|STR 4500 Split-Mount Trunking
|Compact and super-efficient solution for long distance (>100Km) links with up to 10 Gbps capacity
|Frequency Assurance (FAS)
|FAS detects hard to spot interference that can cause poor link performance and outages
|Outages and degraded performance
|Health Assurance (HAS)
|HAS enables proactive monitoring of all links so performance issues can be detected and repaired before outages occur
|High Logistics and Warehousing
|Online ordering, fast delivery, minimized inventory, fewer site delays – save up to 7.5% of each order value