RDL Systems Technology Foundation

Wireless Access Products - Non certification course

Overview

The TEL-1 non-certification course in an RF-101 course and consists of four modules focusing on RDL (RDL-3000, RDL-3100, RDL-5000) systems basic technology foundations, enabling trainees to acquire a working knowledge of broadband wireless systems, RF parameters, modulation and coding, ARQ, wireless system Tx and Rx building blocks, basic parameters of radio antennas, OFDM and MIMO systems in the context of the systems.

The course content is enriched with hands-on labs (with over 70% hands-on if done onsite). If done online, the hands-on part is limited to the demonstration and walk-through of the feature using a live ClearView server.

Courses are conducted by AVIAT expert trainers in a mentoring environment backed by their deep technology expertise and experience.

The course is conducted at Aviat Training locations or can be arranged at customer sites.

Upon completing this course, the trainees will have gained the necessary expertise to understand the use and working of the following in the RDL systems excluding 4G systems:

  • Broadband Wireless Access (BWA) networking and technologies
  • The OSI and TCP/IP networking models
  • Main parameters of information bearing and carrier signals
  • Signal in time and frequency domains
  • Single carrier and multi-carrier signal transmission
  • Basic building blocks of a digital communications system
  • TDD and FDD systems – introduction and differences
  • Basics of digital modulation
  • RF signal propagation parameters and properties.
  • Antennas and their characterizing parameters such gain, beamwidth and polarization
  • High level introduction to OFDM from RDL-3000 implementation point of view
  • Definition of Diversity and MIMO systems
  • Participants should have at least RCSA-RDL-3000 training and sound familiarity with the features and functionalities of the RDL-3000 systems.
  • Each student must have a laptop with administrative rights to install and run IP networking simulation software.

Course outline

  • BWA definitions and evolution – G1 to G4
  • BWA solutions as Layer-2 wireless bridges
  • BWA wireless link parameters
  • TDD and FDD operation overview
  • TDM (time division multiplexing) and TDMA time division multiple access)
  • Basic block blocks of a digital communications systems and their functions
  • Overview of signal frequency, power and phase
  • Signal power measurement and signal quality metrics – SNR, BER
  • Inter-symbol interference (ISI) and signal distortion at high data rates
  • Digital modulation techniques definition – BPSK, QPSK and QAM (16/64/256)
  • Forward error correction (FEC) and ARQ definition, function and use in BWA systems
  • Signal baseband definition and its relationship to the system throughput
  • RF signal time and frequency characteristics
  • Signal loss as function of distance and signal frequency
  • A simplified view of the wireless channel characteristics such fading and multipath
  • Basic RF transmitter and receiver parameters
  • IF and RF signals up-conversion and down-conversion
  • Line of sight (LOS) and non-line of sight (NLOS) propagation definitions and conditions based on the Fresnel zone concept in RF
  • Antenna overview
  • RF Interference identification and mitigation
  • Adjacent channel interference (ACI) and co-channel interference (CCI)
  • Link budgeting and link path profiling
  • OFDM as a multi-carrier transmission technology
  • OFDM and single-carrier transmission – a performance comparison at high date rates
  • A simplified view of the OFDM signal characteristics in time and frequency
  • Subcarrier spacing in OFDM
  • The concept of guard interval in OFDM and how it can fix multipath issues
  • Data rates and throughput of OFDM-based systems
  • Basic multiple-antenna and MIMO systems definition
  • MIMO ability to improve coverage and capacity of a wireless link

Required equipment for training sessions at customer sites

  • Not applicable
  • Not applicable

Sufficient in size to handle all participants, instructor, desks, chairs, classroom equipment. The room must have enough 110 AC (220) AC power and air conditioning to operate equipment, all student’s client’s PC’s and the server or radio as required.

Classroom Equipment

  • Marker board, SVGA or Overhead projector and screen.

Desk and Chairs

  • Desks or workstations with enough room for each student to write have open books, client PC and / or, keyboard and monitor.

Internet Access

  • Internet access through the server or through client PC.

Download description

RDL Systems Technology Foundation

Course description (PDF)

Pricing & scheduling

Please contact your Aviat local sales team for a quote or email

Course specifics

  • Duration: 1-day
  • Capacity: 10
  • Materials provided:
    • Student Handbook (e-Book)

Target audience

This course is intended for wireless deployment, installation and maintenance technicians, level-1 support teams, sales engineers, new hires without an engineering background.

Subscribe to our newsletter