TRN-RDL3K-ICM-A

RDL3000: Installation, Operation and Maintenance

Instructor Led (ILT) Training
0 Classes Available 0 Classes Available 1 Class Available No Classes Available
Filters Sort results
Reset Apply
No results found. Clear filters and try again?
For more information about class availability please Contact Aviat

Overview

The RDL-3000 Operation, Configuration, Installation and Maintenance course consists of 5 modules focusing on the RDL3000 operation, configuration, commissioning, installation, and maintenance based on the Version 3.2+ software features and capabilities.

This program is based on 60% hands-on lab work and 40% content slides. However, adequate backup material is provided in the training manuals for those who want to do more.

The course content is enriched with hands-on labs (with over 70% hands-on if done onsite). If done online, the hands-on part is limited to the demonstration and walk-through of the feature using a live ClearView server.

Courses are conducted by AVIAT expert trainers in a mentoring environment backed by their deep technology expertise and experience in implementation of microwave wireless and IP networks.

The course is conducted at the Aviat Training locations or can be arranged at customer sites.

Objectives

Upon completing this course, the trainees shall understand and acquire hands-on knowledge of the RDL-3000 systems to use the following:

  • The Working and operation of the RDL-3000 as a transparent and VLAN-aware layer-2 broadband wireless solution
  • The technical features of the Ellipse Sector controller (SC) and each of the RDL-3000 remote terminals (RT) in the context of customer specific deployments – Edge/eLTE-MT/RAS-Elite/RAS-Extend and the RDL-3000 Connect Transport Gateways RTs (Connect-OW/OWS/IWS) in PTP and PMP deployments
  • RDL-3000 radio types and their RF attributes such as Tx power, UL ATPC, receiver sensitivity, interference detection and mitigation capabilities (co-channel and adjacent channel) and UL noise floor measurement
  • System architecture and building blocks at the MAC, PHY and RF levels and the performance attributes in applications for the Oil and Gas industry, video surveillance, backhauling and BWA deployments
  • Operation and configuration of RDL-3000 systems in 1+1 redundancy (SC, RT, and link with PRP) deployments with expedited traffic switch over during link failure using the host-MAC access list (ACL) update feature (Rapid-Path)
  • Performance limits of the RDL3000 MIMO-OFDM implementation – MIMO-A/MIMO-B and STBC
  • The benefits of the multiple channel sizes offered by RDL-3000 system from the same hardware using deployment specific product options key – 0.875/1.25/2.5/3.5/5/7/10/14/20 MHz
  • RDL-3000 performance at different frequency bands at all channel sizes using BPSK, QPSK, 16/64/256 QAM with state-of-the-art convolution coding for FEC and Viterbi decoding
  • Configuring and optimizing the spectrum sharing features of RDL-3000 – DFS/CBP/WSDB
  • Configuring RDL-3000 to eliminate multipath in LOS/OLOS/NLOS deployments and optimize link throughput
  • Configuring and managing RT registration in the Ellipse SC – fixed and nomadic RTs using an STID template
  • Data scheduling parameters in RDL-3000 for data, voice, and video applications
  • Understand how the fast fusion link adaptation (FFLA) uses link CQI to dynamically adapt link UBR and MIMO mode to prevailing conditions including unusually deep fade conditions on per RT link basis
  • The use and performance of fixed and variable wireless frame modes in RDL3000
  • The use of and performance differences between the fixed and variable wireless frame modes
  • Setting and ensuring time synchronization in RDL-3000 mitigates intra-cell and inter-cell interference
  • The use of GPS in RDL-3000 to provide location services and frequency synchronization in RDL-3000 deployments
  • Over the air QoS in RDL-3000 including CIR/PIR based on applications carried over the wireless link
  • Data paths on the RDL-3000 wireless network using Subscriber Link, Service Group and Service definitions
  • Packet classification using the 802.1Q tags, VLAN tagging/untagging/mapping and QinQ support
  • The use of 802.1p markers for over the air transmission prioritization of user traffic
  • Understanding the operation of, configuring, and using the VLAN list in RDL-3000 SC and RT
  • Managing RDL-3000 systems using HTTP/HTTPS, CLI (Telnet/SSH) and SNMP V2/V3
  • Setting up user authentication using Radius
  • Understanding the use of and configuring the Elliptic Curve Cryptography (ECC) parameters to enable mutual authentication between an RDL-3000 SC and registering RTs.
  • Enabling OTA data encryption with AES-128/256
  • Understanding Secure mode and FIPS mode security requirements in RDL-3000 systems
  • Enabling secure user credentials and learning the backup and restoring of salted user password SHA hash
  • Link planning and link budgeting for RDL-3000 deployments based on capacity and coverage considerations
  • Fundamentals of RF and frequency planning in the context of RDL-3000 deployments
  • Installation of the Ellipse SC and RDL-3000 RTs in a step-by-step process, grounding and bonding based on best practices in the industry including R56 recommendations
  • Alignment procedures of RDL-3000 RF links and performance evaluation of each link
  • Performing capacity/coverage analysis and optimization of installed links, understanding interference KPI’s in RDL-3000, inference identification and mitigation techniques dealing with CCI/ACI/AACI.

Prerequisites

While the RCSP-RDL-3000-CV program starts with covering some basics of RF, networking and NMS, strongly recommends the following expertise as pre-requisites:

  • Working knowledge of the OSI network model, TCP/IP protocol suite, working of routers, bridges, Layer-2 and Layer-3 QoS and packet processing.
  • Working and hands-on knowledge of VLAN systems
  • Basic understanding of RF system and signal propagation
  • Each student must have a laptop with administrative rights to install and run IP networking simulation software.

Course outline: Part I: RCSP-RDL3000

Module 1: RDL-3000 System Overview, Technology Foundations and Applications

  • The broadband wireless solutions
  • RDL3000 system from the OSI/TCP-IP networking
  • Ethernet packet structure and heard parameters
  • VLAN-based packet classification
  • Layer-2 QoS
  • RDL-3000 architecture
  • MAC/PHY/RF parameters
  • Hardware skewsof the Ellipse SC
  • RDL-3000 remote terminals (EDGE, eLTE-MT, RAS-Elite, RAS-Extend and Connect-OW/OWS/IWS)
  • Upcoming features in RDL-3000 at the MAC/PHY/RF
  • Managing RDL-3000 using http/https/telnet/SSH/SNMP
  • Software upgrading and IP/username/password recovery
  • Use of LLDP in RDL-3000 systems
  • DHCP IP addressing
  • Creating secure user accounts

From the RDL-3000 (XP) and RDL-3100 (XG) technology point of view, the topics covered in this module include:

  • Differences between fixed and variable frame modes and time synchronization
  • Static and dynamic DL ratio
  • MIMO-OFDM as implemented in RDL-3000
  • Multipath handling capabilities
  • Error detection and correction (ARQ and FEC)
  • Dynamic adaptive modulation using the proprietary fast fusion link adaption (FFLA) algorithm
  • MIMO-A/STBC for enhanced reach and MIMO-B for enhanced throughput
  • Use of multiple channels sizes (0.875/1.25/2.5/3.5/5/7/10/14/20 MHz)
  • Multiple coding rates (from 1/2 to 7/8)
  • Use of BPSK/ QPSK/ 16QAM/ 64QAM/ 256QAM
  • Error handling in RDL-3000 links
  • Options key controlling different product features and the options available: SecureLink, Metro Link, Smart Link, and Video
  • RDL-3000 deployments in the Energy, Oil and Gas, ISP, and other deployment environments

Module 2: RDL-3000 System Architecture, Operation and Configuration

  • Wireless link and data plane parameters of the RDL-3000
  • RDL-3000 internal architecture
  • Function of each module (switch, wireless MAC, MIMO-OFDM and RF module)
  • Wireless configuration in the SC and RT with parameter selection examples
  • Complete definition of QoS in RDL-3000
  • Definition and functions of Subscriber Link, Group and Service
  • The pass-through and tagged mode of operation for a Group and a Service
  • Packet processing and classification at the SC Ethernet port
  • Mixed mode deployments
  • Rapid Auto Provisioning (RAP)
  • Automatic frequency scanning features
  • Typical networking features of RDL-3000 deployments
  • Strict VLAN networks for data as well as RT and host management
  • The security features supported in RDL-3000

Module 3: RF Link Design and Planning

  • RF parameters of PTP and PMP wireless links
  • RDL3000 link budgeting
  • Fresnel zone
  • The BER and PER performance of each link type
  • Antenna height requirements at different frequency bands
  • Link availability for different applications
  • Fade margin requirements
  • RDL-3000 receiver thresholds
  • The Link budgeting parameters
  • RDL-3000 RF planning
  • The built-in spectrum analyzer (Spectrum Sweep Function)

Module 4: System Installation, Link Alignment, and Interference Mitigation

  • Installation of Ellipse SCs, RDL-3000 RTs, PoE injectors and lightning protectors (LPs)
  • Pre-installation requirements
  • RF exposure and safety guidelines
  • RDL3000 installation
  • Installation of the specific RTs applicable
  • The wireless link alignment and the key performance indicators (KPI)
  • RF monitor tool
  • Implications of aligning antennas to the side-lobes, reflections causing issues due to wrong antenna tilt (overshoot and undershoot)
  • Antenna height adjustment
  • Analyzing alignment quality using RSSI min and RSSI max
  • RSSI and SINADR relationship
  • Packet discards and retransmission rate on the link
  • Wireless systems interference indicators
  • RDL-3000 KPIs for interference detection and mitigation
  • Interference identification and mitigation

Module 5: Fault Simulation and Hands-on labs

  • Hands-on exercises covering the RDL3000 PTP and PMP configuration based on the applicable MAC/PHY/RF features

Course Outline: Part III: iLTE Solutions Overview

Section 1: 3GPP high level overview
Section 2: RDL-6000 systems and CBRS solution
Note: Part-III is a high-level overview and hence providing description is not warranted.

Required equipment for training sessions at customer sites

RDL-3000 Equipment Requirement for a Class of 8-12 Trainees
ItemMin Quantity        SpecsRemarks
SC Ellipse4Must be in the same frequency bandRTs with integrated antenna cannot be used in the class
EDGE RT6
SC antenna with brackets1This will be used for the installation module
Lightning Arrestor1For demonstration of installation
PoE Injector10802.3at compliant – preferably AC-DC type
POE power chords10One for each PoE injector
CAT5 cables20 piecesterminated according to the 568B or A standard- Straight cable is ok
RF jumper cables12 pieces
Laptop/Desktop1 per TraineeTrainees should have admin privilege for the laptops
Switch (unmanaged)1 with 16 or more portsRequired for the ClearView course
ClearView ServerReview this with the Aviat  team – a laptop can be used
Projector1Preferably one which can support high resolution laptop
Flipchart and markers3Flip charts and markers (black, blue, and red)

 

Classroom

  • Sufficient in size to handle all participants, instructor, desks, chairs, classroom equipment. The room must have enough 110 AC (220) AC power and air conditioning to operate equipment, all student’s client’s PCs and the server or radio as required.
  • Hands-on participation of the trainees is subject to hardware availability in on-site sessions.
Target Audience

This course is intended for Level-2 support groups, engineers, and technicians.

Course specifics

Course Number TRN-RDL3K-ICM-A
Products
RDL3000
Materials Provided

Student Handbook (e-Book)

Pricing & scheduling

Please contact your Aviat local sales team for a quote or email

Markets

Aviat is pioneering wireless solutions across diverse industries, driven by customer challenges. Explore Now
$
Mobile Operators
$
WISPs
$
Public Safety
$
Government
$
Utilities
$
Oil & Gas
$
Mining
$
Transportation

Products

Aviat's products offer unique, tailored solutions, ensuring optimal performance and cost-effective network design. Explore Now
$
All-Outdoor Radio
$
Microwave Indoor Units
$
Microwave Routers
$
Split-Mount Radio
$
All-Indoor Radio
$
Microwave Trunking
$

Virtual Fiber PTP/PMP 

$
Private LTE
$
Network Management

Hosted Softare

Aviat's hosted software streamlines network management, ensuring efficient, accessible, and reliable solutions. Explore Now
$
Aviat Design
$
AviatCloud
$
Frequency Assurance Software
$
Health Assurance Software

Services

Aviat offers tailored services optimizing wireless infrastructure, from project management to continuous support Explore Now
$
Project Services
$
Managed Services
$
Support

Explore Company

Aviat Networks delivers reliable wireless transport solutions, backed by 70 years of expertise and a strong focus on customer satisfaction. Explore Now
$
About Aviat
$
Compliance
$
Responsible Sourcings
$
Leadership
$
Careers

Resources

Aviat's Resource Center offers a comprehensive collection of insights and tools to support your wireless transport needs Explore Now
$
Blog
$
Webinars
$
Collateral

Investors

Aviat Networks, Inc. is the leading expert in wireless transport solutions and works to provide dependable products, services and support to its customers. Explore Now
$
Overview
$
Press Releases
$
Events & Presentations
$
Financial Information
$
Stock Information
$
Investor Resources

Contact Aviat

Contact Aviat for network solutions, sales, support, and global locations. Explore Now
$
Discuss My Network
$
Schedule a Demo
$
Request a Quote
$
Request Customer Pin
$
Get Tech Support
$
Request an RMA
$
Upgrade / Buy License Key
$
Become Aviat Certified
$
Customer Training